microstructure造句
2024年04月26日 10:11:10
Microstructure changes, microfracture characteristics and its generation mechanisms during MWH were studied through laboratory.
通過實驗手段研究了微波加熱前后砂巖巖樣微觀結構變化 、 微裂縫產生機理及特征.
The Research of the
Microstructure of the Co - Cr - W Alloy Plasma Surfacing.
Co -Cr-W 系等離子弧堆焊合金層顯微結構的研究.
The
microstructure of the film was studied by scanning electron microscope.
用掃描電鏡觀察了膜的微觀形態.
The discovery and current advances of intragranular ferrite and its relation with
microstructure control are reviewed.
回顧和評述了晶內鐵素體的發現、發展及其與組織控制的關系.
The research findings of article reveals
microstructure fractal control mechanics of soft clay's macrography distortion.
本文研究成果初步揭示了飽和軟粘土宏觀變形的微觀結構分形控制機理.
The weld metal showed very good toughness at low temperature, and dominant
microstructure of acicular ferrite.
結果表明:所研制焊絲的焊縫金屬具有優良的低溫韌性, 且實現了以得到針狀鐵素體組織為主的設計目標.
The variations in
microstructure of these specimens after annealing are investigated by Mssbauer hyperfine parameters.
用穆斯堡爾譜超精細參數研究微觀結構隨退火溫度的變化.
Nucleate reagents are disadvantageous to obtain ideal surface
microstructure of lithium matte glaze.
成核劑的加入對形成理想的鋰質無光釉表面顯微結構反而不利.
The
microstructure has been studied using SEM, EDS and XRD.
用掃描電鏡(SEM) 、 能譜(EDS)和X射線 衍射(XRD)測試其微觀結構.
The toughness, fractograph and
microstructure of the failed die specimens have been examined and analysed.
檢測了失效模具材料的微觀組織 、 擊韌性和斷口形貌.
The
microstructure and its change during burning process was introduced.
介紹了木質陶瓷的微觀結構及其在焙烤過程中的變化機理.
The
microstructure of the weld zone is tempered martensite zone.
熱影響區的顯微組織主要為回火馬氏體;熔合線結合良好,組織均勻.
The
microstructure of yogurt gels presented reticulation structures, in which there were numberless regular interspaces.
酸奶凝膠超微結構呈一種纖維網狀立體結構, 網狀纖維中間形成無數有規則的空隙.
The results are important to analyses the
microstructure of the rolled - piece.
這一結果可指導分析軋件的微觀組織變化.
In welding zone the lath shape
microstructure reduces, and equiaxed
microstructure increases.
焊縫區在經過長時運行后板條狀組織減少, 等軸狀組織增多.
The
microstructure and microhardness of ths laser nulted Fe - Sb alloys were studied.
研究了激光表面熔化Fe-Sb合金的顯微組織和顯微硬度.
Firstly, equiaxed
microstructure could be produced by treatments including hot compression and duplex anneal.
本文首先通過變形及雙重退火獲得了很好的等軸組織.